 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ten-X(R) 10 mm switching soleniod valve FEATURES * 3-way, 2 position (NO, NC & Distributor) * Optional `Hit and Hold' drive electronics using pulse width modulation (PWM) at 25-32 kHz * Minimum flow of 8 lpm @ 6 psi and 22 lpm @ 30 psi * 10 mm single piece body design * Barbed pressure ports allow for direct tubing or manifold assemblies * RoHS compliant MEDIA COMPATIBILITY Non-reactive gases WETTED MATERIALS PBT (polybutylene terephthalate) glass filled; 430FR series stainless steel; 302 series stainless steel; Viton (FKM) or silicone elastomer PHYSICAL PROPERTIES Operating environment (continuous duty) 0 to 50 C Storage temperature Spacing -40 to 70 C 10 mm (centerline) Barbs for 1.98 mm (0.078 in) I.D. tubing or manifold mount with gasket ELECTRICAL Power Voltage Electrical connections 0.5 W 5, 12, 24 VDC PC pins Porting Weight without electronics with electronics Internal volume 10.7 g 12 g 0.131 cm3 (0.0080 in3) Ten-X is a registered trademark of Parker Hannifin Corporation. E / 11260 / A 1/4 www.sensortechnics.com Ten-X(R) 10 mm switching soleniod valve PERFORMANCE CHARACTERISTICS Part no. 914-1... (silicone elastomer) 914-2... (Viton elastomer) Pressure 0...6 psi 0...6 psi, 0...20 psi, 0...30 psi Minimum flow Orifice siz es/ Equivalent CV1 Leak rate2 Response 0.016 sccm <5 ms cycling <20 ms cycling 8 lpm @ 6 psi, 22 lpm @ 30 psi 0.060" (1.52 mm)/ 0.042 CV 0.2 sccm FLOW CURVES (typical air flow at 24 C)3 6 psi devices 20 psi and 30 psi devices Notes: 1 The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. If several valves with the same nominal diameter are compared, the valve with the highest CV value has the best flow dynamics design. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV). 2 sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3 slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm. E / 11260 / A 2/4 www.sensortechnics.com Ten-X(R) 10 mm switching soleniod valve OUTLINE DRAWING AND MANIFOLD MOUNT DIAGRAM 6 psi devices 1.139 (28.93) 0.020 (0.5) sq. pins 0.236 (6.00) 0.077 (1.96) 0.475 (12.07) 0.170 (4.32) 0.575 0.375 (14.61) (9.53) Long pin Short pin 0.148 (3.75) O 0.120 (3.05) Barb fittings for 0.078 (1.98) I.D. polyurethane tubing Normally open port Common port Normally closed port 0.030 (0.76) for use with wire hold down for PCB mounting 0.976 (24.79) 0.766 (19.46) O 0.093 (2.36) dimensions in inches (mm) 0.212 (5.38) 2-56 UNC-2B 0.394 (10.01) 0.871 (22.12) 0.197 (5.0) 0.394 (10.01) O 0.090 O 0.132 0.001 x 0.180 O 0.154 0.003 x 0.055 0.002 c'drill 40 to O 0.132 (O 2.29 O 3.35 0.025 x 4.57 O 3.91 0.076 x 1.4 0.05 c'drill 40 to O 3.35) 0.390 (9.91) 0.195 (4.95) Feature for 2-56 screw for valve mounting 0.870 (22.10) 1.25 (31.78) 0.207 (5.26) 0.174 (4.42) 0.766 (19.46) 0.976 (24.79) 20 psi and 30 psi devices with electronics 1.303 (33.10) 1.174 (29.81) 0.212 (5.38) 0.025 (0.64) sq. pins 0.100 (2.54) 0.361 (9.17) 0.619 (15.72) Normally open port Common port 0.170 (4.32) O 0.120 (3.05) 0.035 (0.89) O 0.093 (2.36) Barb fittings for 0.078 I.D. polyurethane tubing 2-56 UNC-2B 0.394 (10.01) 0.871 (22.12) Normally closed port dimensions in inches (mm) 0.976 (24.79) 0.766 (19.46) 0.267 (6.78) 0.197 (5.0) 0.394 (10.01) O 0.090 O 0.132 0.001 x 0.180 O 0.154 0.003 x 0.055 0.002 c'drill 40 to O 0.132 (O 2.29 O 3.35 0.025 x 4.57 O 3.91 0.076 x 1.4 0.05 c'drill 40 to O 3.35) 0.390 (9.91) 0.195 (4.95) Feature for 2-56 screw for valve mounting 0.870 (22.10) 0.262 (6.65) 0.766 (19.46) 0.976 (24.79) E / 11260 / A 3/4 www.sensortechnics.com Ten-X(R) 10 mm switching soleniod valve ORDERING INFORMATION 6 psi devices Series Options 914 Elastomer 1 Silicone 2 Type 1* 2/3 way, NO, 6 psi Model 1 Standard (without electronics) Voltage 05 5 VDC Electical 1 Short pins 2 Long pins Accessories* 000 none Viton (FKM) 2** 2/3 way, NC, 6 psi 6** Distributor, 6 psi * Silicone elastomer only ** Viton (FKM) elastomer only 12 12 V D C 24 24 V D C * please order separately Example: 914 1 1 1 05 1 000 20 psi and 30 psi devices with electronics Series Options 914 2 Elastomer Type 2 Model Integrated electronics Voltage 05 5 VDC 3 Electical Pins (2.54 mm) Accessories* 000 none Viton (FKM) 3* 2/3 way, NC, 30 psi 4** 2/3 way, NO, 30 psi 5** Distributor, 20 psi * Silicone elastomer only ** Viton (FKM) elastomer only 12 12 V D C 24 24 V D C * please order separately Example: 914 2 3 2 05 3 000 Note: Not all combinations might be available. Please contact your nearest Sensortechnics sales representative for further information. Accessories (please order separately using the following order numbers) Order No. 191-000112-010 (free of charge) 191-000112-012 (free of charge) 195-000211-001 (free of charge) 195-000242-001 (free of charge) 590-000073-001 (extra charge) Description Mounting screws for 6 psi devices (2 screws per valve) Mounting screw for 20 psi and 30 psi devices (2 screws per valve) Manifold gasket (FKM) for 6 psi devices (1 gasket per valve) Manifold gasket (FKM) for 20 psi and 30 psi devices (1 gasket per valve) 18 " leads w/ connector (only for devices with integrated electronics) Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11260 / A 4/4 www.sensortechnics.com |
Price & Availability of 914242123000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |